OPERATION SPECIFICATIONS
|
| TRANSMITTER |
RECEIVER |
Frequency Range:
28.0000 - 29.9999 MHz |
Frequency Range:
28.0000 - 29.9999 MHz |
Tuning Steps:
100 Hz,
1 KHz, 10 KHz, 100 KHz, 1 MHz |
Circuit
Type:
Superheterodyne, dual conversion |
Emission Types:
LSB, USB (A3J), CW (Al), AM (A3), FM (F3) |
Clarifier Range:
±500 Hz |
Carrier Suppression:
better than 40 dB below peak output |
Sensitivity:
(CW, SSB and AM figures measured for
10 dB S +
N/N)
SSB, CW better than 0.3 uV
FM better than 0.5 uV for 12 dB SINAD |
Unwanted Sideband Suppression:
better than 50 dB below peak output (1 KHz tone) |
Spurious Radiation:
better
than 50dB below peak output |
Intermediate Frequencies:
lst IF 10.695 MHz
2nd IF 455KHz
SSB, CW IF 10.695 MHz |
Audio Response:
better than 30 dB below peak output |
Frequency Accuracy:
better than + 10 ppm from 0 - 40 degrees C
after 15 minute warm up |
Image Rejection:
better than 70 dB |
IF Rejection:
better than 80 dB for all frequencies |
Modulation Type:
A3J: Balanced Modulator
A3: Voltage Modulator
F3: Frequency Modulator |
Selectivity:
SSB,
CW-
AM, FM |
- 6dB
4.2 KHz
6.0 KHz |
60dB
8.6 KHz
18 KHz |
Maximum FM Deviation:
±1.5 KHz |
Noise Blanker:
Switchable six stage high gain type |
Output Impedance:
50 ohms (nominal), unbalanced |
Dynamic Range:
better than 100 dB |
Microphone Impedance:
low (500 to 600 ohms) |
Audio Output Power:
2 watts minimum (into 8 ohms, with less than
10% THD) |
POWER CONSUMPTION:
30Watt 6 Amps
100Watt 25 Amps |
Audio Output Impedance:
8-16 ohms |
POWER
OUTPUT:
30W Model CW
30Watts SSB 25Watts PEP
AM 8Watts FM 8Watts RMS
100W Model CW
150Watts SSB 120Watts PEP
AM
30Watts FM 30Watts RMS |
POWER CONSUMPTION:
500 Milliamps |
DIMENSIONS:
30Watt
2-3/9' H x 7-3/4:' W x 11' L
WT: 3 LB
100Watt
-23/8" H-7314' W-13' L
WT: 5 LB |
